Filter
Top Products
16 STAR TRAC TOTAL BODY TRAINER OWNER’S MANUAL
■ WATTS - Shows your current watts expenditure at that specific time during your workout.
NOTE: Press the S
CROLL key to toggle between data during your workout.
2. Press the Lower Data Information Window S
CROLL key to view the following workout data (the current data display is indicated by
an LED next to the parameter name):
■ DISTANCE - Shows the total number of miles or kilometers you have traveled thus far.
■ SPEED - Shows the speed at which you are currently striding, in miles-per-hour or kilometers-per-hour.
■ METS - Shows your current METS expenditure at that specific time during your workout.
PAUSE MODE
If you come to a complete stop during your workout, the TOTAL BODY TRAINER will enter a “pause” mode, the duration of which is set in
Maintenance Mode. To continue your workout, begin striding before the “pause” timer expires and your workout data will not be lost.
COOLDOWN CYCLE
In most programs, once you have completed your workout, the TOTAL BODY TRAINER enters a two-minute Cooldown cycle.
NOTE: The TOTAL BODY TRAINER software is programmed to properly decrease striding resistance to provide a cooldown.
To operate the TOTAL BODY TRAINER during Cooldown:
1. You can adjust the difficulty LEVEL during Cooldown.
■ Use the keys to enter a difficulty LEVEL (from 1 to 20); or press the or key, as desired, to increase or decrease
the difficulty LEVEL in 1 unit increments.
■ When the desired difficulty LEVEL has been entered by using the keys, press the key to accept the displayed
LEVEL or press the key.
2. When the Cooldown cycle ends, your workout summary displays in the Information Window. If you wish to exit the Cooldown
cycle before it ends automatically, stop striding.
USING THE PERSONAL FAN
The
STAR TRAC TOTAL BODY TRAINER
is equipped with a built-in personal fan to increase your comfort during a workout. You can con-
trol the fan speed during your workout.
To operate the personal fan:
■ Press the key, as necessary, to cycle the personal fan from OFF to HIGH to LOW to OFF. An LED indicator lights to show the
currently selected fan speed.
■ The fan remains set at the set speed if you pause your program, unless your workout was less than two minutes in length.
■ The fan turns off automatically if you exit your workout, or when you complete your workout program.
■ The fan turns off automatically if you pause your program and the time elapsed is less than two minutes.
USING SELECTFIT™ (P-TBTX ONLY)
The
STAR TRAC P-TBTxTOTAL BODY TRAINER
is equipped with the SelectFit™ feature that provides a variable upper body workout while
striding. The SelectFit™ feature can be used with any workout program.
NOTE: SelectFit™ is automatically enabled when the T
OTAL BODY program is selected. The program varies the position of the upper body
arm between the “PULLING” and “PUSHING” positions.
To operate the SelectFit™ feature:
■ Press the key to place the upper body arms in the “PULLING” position. Press the key to place the upper body arms in the
“PUSHING” position.
■ Press the key to place the upper body arms in the disengaged or “NONE” position.
■ The upper body arms remain in the set position if you pause your program.
■ The SelectFit™ feature returns to the “PULLING” position if you exit your workout, or when you complete your workout program.