Filter
Top Products
Page 6
INSTALLING THE ROM ADJUST AND CAM
ASSEMBLY:
1. Locate (from left to right) one (M8,
20MM, Socket Head Cup screw), one
(M8, Washer), two (Taper Bearings) and
the ROM ADJUST ASSEMBLY as
shown.
2. Insert a taper bearing to the shaft of the
ROM ADJUST ASSEMBLY until it
bottoms all the way against the ROM
PLATE.
3. Place the assembly into the TAPER
BEARING HOUSING, as shown.
4. Install the second TAPER BEARING
onto the shaft and into the TAPER
BEARING HOUSING.
. . .continue to next page. . .