Stamina Products 15-4760 Bicycle User Manual


 
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
6
ASSEMBLY INSTRUCTIONS
STEP 1
Refer to the illustration. Position the FRONT STABILIZER(2), the short one, with its large holes next to the
FRONT FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x55mm)(57).
You can adjust the LEVELING CAPS(49) on the REAR STABILIZER(4) to keep the Recumbent
Bike stable.
STEP 3
Attach the LEFT and RIGHT SEAT FRAMES(5, 6) onto the both side of the REAR FRAME(3) with BUTTON
HEAD BOLTS(M10x1.5x125mm)(58), WASHERS(M10)(82), and NYLOCK NUTS(M10x1.5)(72).
STEP 2
Loosen the ADJUSTMENT KNOB(45) on the FRONT FRAME(1). Slide the REAR FRAME(3) backward
and secure with the ADJUSTMENT KNOB(45). Attach the REAR STABILIZER(4), the one with the
LEVELING CAPS(49), onto the REAR FRAME(3) with CARRIAGE BOLTS(M8x1.25x65mm)(56), ARC
WASHERS(M8)(79), LOCK WASHERS(M8)(81), and ACORN NUTS(M8)(74).
NOTE:
Position the large
holes next to the
Front Frame(1).