Stamina Products 15-4760 Bicycle User Manual


 
STORAGE
13
1.
2.
3.
4.
To store the R360s RECUMBENT BIKE simply keep it in a clean dry place.
Adjust the REAR FRAME(3) into the FRONT FRAME(1) to the shortest position. The R360s RECUMBENT
BIKE is approximately 41" long x 27 1/2" wide x 36" tall. These dimensions will vary. Please measure
your R360s RECUMBENT BIKE if exact dimensions are needed.
Lift the R360s RECUMBENT BIKE from the FRONT STABILIZER(2) and REAR STABILIZER(4) to
move.
To avoid damage to the electronics, remove the batteries before storing the R360s RECUMBENT BIKE
for one year or more.
MAINTENANCE
The safety and integrity designed into the R360s RECUMBENT BIKE can only be maintained when the
R360s RECUMBENT BIKE is regularly examined for damage and wear. Special attention should be given
to the following:
Press the " up " and " down " buttons to verify that the Magnetic System provides different tensions.
The Magnetic System should provide many years of use.
Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the
left pedal has left hand threads and is tightened by turning counterclockwise.
Verify that the Warning Label is in place and easy to read. Call Stamina Products immediately
(1-800-375-7520) for a replacement Warning Label if the Warning Label is missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the R360s RECUMBENT BIKE removed
from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the R360s RECUMBENT
BIKE.
Keep your R360s RECUMBENT BIKE clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.