Filter
Top Products
52
Customizing the Treadmill
You can customize several parameters on the ClubTrack 2100 to conform to your individual
requirements, including setting time limits, speed limits, changing screen contrast (2100 LC
only), changing language, and changing units. To customize the controller:
1. Press [CLEAR], [3], [ENTER]. The controller will display “CUSTOMIZE.”
2. Press [Incline: UP] or [Incline: DOWN] to scan through the customize choices. Select
the option you want to change by pressing [ENTER]. Then, use the [Speed: +] or
[Speed: -] keys to view the choices for the selected option. Press [ENTER] to accept the
choice for that option.
The customize options are as follows:
Max time limit
• For no time limit, press [0], [ENTER]. The screen will display “TIME LIMIT OFF.”
• Use the numeric keypad to enter the desired time limit. Press [ENTER], [ENTER]
to accept the new time limit.
Change units
• Use the [Speed: +] and [Speed: -] keys to toggle between USA units and Metric
units. Press [ENTER] to select your option.
Choose the type of heart rate input.
• See the Heart Rate Priority section for details of the choices.
Adjust screen contrast (2100 LC only)
• Use the [Speed: +] and [Speed: -] keys to increase or decrease the contrast
level. Press [ENTER] to select your option.
Max speed
• Use the numeric keypad to enter the treadmill speed limit. Press [ENTER], to
accept the new speed.
Enable magnet key
• Use the [Speed: +] and [Speed: -] keys to toggle between “ON” and “OFF.”
Press [ENTER] to select your option.
Reset Defaults
• This code will reset all exercise parameters to the factory defaults. Press
[ENTER], to accept the default values.
3. To exit “CUSTOMIZE”, press the [CLEAR] key.