Filter
Top Products
50
Error Codes
If the controller finds a fault in the system, it displays an error code (example: “CONFIG
REQRD”). If an error code appears, turn the circuit breaker off, and then back on to restart the
system. If the error code appears again, record the code. Then, turn off the treadmill and call a
StairMaster-trained service representative (see section “Troubleshooting”).
Viewing Maintenance Information
The total time and distance the treadmill has been used can be viewed under Maintenance
Information. This information can help you schedule treadmill maintenance and check treadmill
usage.
To view maintenance information:
1. Press [CLEAR], [4], [0], [ENTER]. The controller will display the machine run time in
hours since last cleared. Press [CLEAR] to exit.
2. To view the total distance the treadmill has been used, or press [CLEAR], [4], [2],
[ENTER]. Press [CLEAR] to exit.