Filter
Top Products
OPERATING THE PEDOMETER 7
RESETTING THE PEDOMETER
1. Reset Current Data: PRESS & HOLD the RESET/▲ for 2 seconds. All current information
will be cleared from display (data will be saved to 7-day memory).
2. Reset User Information and Memory: PRESS & HOLD the RESET/▲ for 5 seconds. All
information will be cleared from display (data will be deleted from 7-day memory).
Note: This will also change Miles or Kilometers unit of measure and will need to be reprogrammed by PRESSING &
HOLDING the RESET/▲ key for 5 seconds. Stride length and weight will also have to be reprogrammed.
CHANGE UNITS OF MEASURE
You may change units of measure (Miles or Kilometers) by PRESSING & HOLDING the
RESET/▲ key for 5 seconds. Stride measurement will be reset to defaults and be measured
in centimeters.
Note: This will also delete all data from the 7-day Memory and user information such as stride length and weight.
AUTO SLEEP MODE
To save battery power, this unit has an automatic, low power “Sleep” mode when no activity
is detected, for four (4) minutes. The lower display will show whenever unit is not in use.
VIEWING THE 7-DAY DISTANCE MEMORY
The Total Fitness Pedometer features a 7-day memory that records Distance Traveled for
the previous 7 days. Each Memory file is a cumulative total of that day’s distance traveled
(multiple sessions accumulate for combined total). Memory files automatically reset to the
next day at approximately midnight and a new day’s cumulative total begins recording.
Note: Current data in display will be split at time of automatic reset; however, current session information will still be
displayed.