Filter
Top Products
XE Series Elliptical
16
XE400 Console
Power up
When the A.C. power cord is connected to the Elliptical and the power switch turned on, the
console will automatically power up. If there is no input to the console for 20 minutes the console
will go to stand-by mode. In stand-by mode the console display will turn off. To turn the console on
press any key.
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on. When the lights go off, the dot matrix display will show a software version (i.e.:
VER 1.0) and the message window will display Odometer. The odometer reading shows how
many hours the elliptical has been used and how many virtual miles the elliptical has gone. The
distance window shows the distance in miles and the time window shows the total hours of use.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles of the programs and
the message window will be scrolling the start up message. You may now begin to use the
console.
Operation of Your Elliptical
Dot matrix
Program buttons
Fan
Message window
Data display