Filter
Top Products
For wheels with
bladed spokes:
Use some isopropyl
(rubbing) alcohol or
a mild detergent to
thoroughly clean the
spoke that you plan
to attach the magnet
to. Remove the back-
ing from the adhesive
tape and firmly press
the magnet onto
spoke. The tape uses
a special pressure sensitive adhesive.
To ensure a strong bond, please wait
at least 12 hours for the adhesive to
cure before riding your bicycle.
Your SpeedZone Sport comes pre-
configured with a strap to fit standard
road and mountain bike handlebars.
Attach the mount to the handlebar
using the Philips head screw provid-
ed. Tighten so that the bracket cannot
rotate on the handlebar. There are
several sizing shims provided to fit
different diameter bars. If you are
using the new 31.8mm diameter
bars, you will need to purchase the
31.8mm Handlebar Mount Kit
(Specialized P/N 4812-3100) from
5
Sensor
Magnet
1/32-1/16 in.
1-2 mm
Sensor
Front
Wheel
FIGURE 5.
MAGNET
PLACEMENT
FIGURE 6. STRAP INSTALLATION