Specialized CR2032 Cyclometer User Manual


 
"MODE" button for three seconds.
To set the clock, press the "SET" but-
ton for three seconds. The display will
flash either twelve (12:) or twenty four
(24:). Select between 12: or 24:
mode by pressing the "MODE" but-
ton. Press the "SET" button to confirm
your selection. The hour digit will now
begin flashing. Press the "MODE"
button to adjust the hour digits.
AM/PM is selected by scrolling the
hour digit. Press the "SET" button to
accept the hour selection. The minutes
will flash and can be adjusted by
pressing the "MODE" button. (Hold
the "MODE" button to scroll through
the digits quickly) Press the "SET" but-
ton to set the minutes and return to
clock mode (See figure 11).
Note: The minute hand of the analog
clock has twelve segments and can
only display time in five-minute incre-
ments. The hand will not jump to the
next segment until the digital clock
reaches whole five-minute intervals.
(e.g. 12:05, 12:10, 12:15 etc.)
14
Km/h
FIGURE 11. CLOCK MODE