Filter
Top Products
battery, make
a note of your
odometer read-
ing and wheel
circumference
settings before
removing it.
You can then
re-enter the data
when you restart the computer.
MOUNTING
THE SPEEDZONE SPORT
The SpeedZone Sport sensor can
mount on the right or the left side
of the fork blade. Use the cable tie-
wraps provided to position the
sensor. Do not tighten until the final
placement of the sensor magnet is
correct. (See figure 4). Wheel
magnets have been
provided for both tra-
ditional round spokes
and bladed (flat)
aerodynamic spokes.
For wheels with
round spokes:
Attach the magnet to
a spoke across from
the transmitter with
the magnet screw. The
clearance between the
magnet and the transmitter should be
approximately 1/32"-1/16" (1-2mm).
Tighten the magnet and transmitter.
Do not over-tighten the magnet screw.
(See figure 5).
4
Cable
Tie
Wraps
Sensor
Brake
Cable
FIGURE 4.
SENSOR
PLACEMENT
CR2032 battery
FIGURE 3.