Filter
Top Products
73
Table of Contents Menu Lists Index
GB
A rattling noise can be heard when you
shake this product.
If no noise is heard when this product is
turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you
change the following settings:
[White Balance]
[Exposure]
[Focus]
[IRIS]
[Shutter Speed]
[AE Shift]
[White Balance Shift]
[Low Lux]
[Scene Selection]
[Tele Macro]
[
SteadyShot]
[
SteadyShot]
[Auto Back Light]
[Face Detection]
Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.
Charge the battery pack (p. 11).
The CHG (charge) lamp does not light
while the battery pack is being charged.
Set the POWER switch to OFF (p. 11).
Attach the battery pack to this product
co
rrectly (p. 11).
Connect the power cord (mains lead) to the
wall outlet (wall socket) properly.
Th
e battery charge is completed (p. 11).
The CHG (charge) lamp flashes while the
battery pack is being charged.
If the temperature of the battery pack is too
high or too low, you may not be able to charge
i
t (p. 88).
Attach the battery pack to this product
co
rrectly (p. 11). If the problem persists,
disconnect the AC Adaptor from the wall
outlet (wall socket) and contact your Sony
dealer. The battery pack may be damaged.
The remaining battery time indicator does
not indicate the correct time.
The ambient temperature is too high or too
low. This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a n
ew one (p. 88).
The indicated time may not be correct
depending on the environment of use.
The battery pack is quickly discharged.
The ambient temperature is too high or low.
This is not a malfunction.
The battery pack has not been charged
enough. Fully charge the battery again. If the
problem persists, replace the battery pack with
a n
ew one (p. 88).
Viewfinder
Menu items are grayed out.
You cannot select grayed items in the current
recording/playback situation. Press Enter with
a grayed item selected and check the reasons
why you cannot select the item.
There are some functions you cannot activate
simultaneously.