-24-
M1001 6" x 26" Vertical Mill
Complete this process once you have familiarized
yourself with all instructions in this manual
and have made sure the machine is completely
lubricated.
NOTICE
Make sure the mill has been properly
lubricated.
Make sure there are no obstructions around
or underneath the spindle.
Set the spindle speed to the lowest RPM.
Set the SPINDLE DIRECTION toggle to the
forward position.
Turn ON the spindle in the forward rotation
and let it run for a minimum of 10 minutes.
Turn the spindle OFF, wait for the spindle
to come to a complete stop.
Set the SPINDLE DIRECTION toggle to the
reverse position and turn the spindle ON.
Run the spindle in the reverse direction for
10 minutes.
Repeat these steps for each RPM setting.