Filter
Top Products
-14-
M1001 6" x 26" Vertical Mill
60"
41"
5 M1001 minimum working clearances.
Your vertical mill has a large
weight load of 822 lbs. in a small footprint.
We recommend placing this mill on a
concrete floor.
Consider existing and
anticipated needs, size of material to be
processed through the machine, and space
for auxiliary stands, work tables or other
machinery when establishing a location for
your vertical mill (see 5).
Lighting should be bright enough
to eliminate shadow and prevent eye strain.
Electrical circuits must be
dedicated or large enough to handle
amperage requirements. Outlets must be
located near each machine, so power or
extension cords are clear of high-traffic
areas. Follow local electrical codes for
proper installation of new lighting, outlets,
or circuits.
The table and other unpainted parts of your
Vertical Mill are coated with a waxy grease that
protects them from corrosion during shipment.
Clean this grease off with a solvent cleaner or
citrus-based degreaser. DO NOT use chlorine-
based solvents such as brake parts cleaner or
acetone—if you happen to splash some onto a
painted surface, you will ruin the finish.