Filter
Top Products
14
15. Tighten nine #8 x 3/4" Screws (2) into the
Console Base Back (93) in the indicated loca-
tions, starting with the center Screw.
15
2
2
2
2
2
93
2
2
Start First
16. Slide the Handrail Covers (79, 80) forward until
they match up with the Console Base (64).
Attach the Handrail Covers with the four #8 x 1
1/4" Screws (107) that you removed in steps 9
and 10. Do not overtighten the Screws.
Tighten four #8 x 3/4" Screws (2) into the con-
sole assembly in the locations shown.
Raise the Base Covers (82, 83) and firmly
tighten the four 3/8" x 2 3/4" Screws (7) first and
then the 3/8" x 1 1/4" Screws (8) (only one side
is shown). Then, press the Base Covers into
place.
16
Console
Assembly
107
82
83
7
8
2
2
107
80
79
64