Sears NTEL08911.0 Stepper Machine User Manual


 
6
1. Remove the four screws and the four shipping
brackets (only one of each is shown) from the
Frame (1). Discard the screws and the shipping
brackets.
Then, tighten the four Leveling Feet (52) (only
one is shown) into the underside of the Frame
(1).
1
52
1
Shipping Bracket
Screw
Assembly requires two persons.
Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
To identify small parts, see page 5
In addition to the included tool(s), assembly
requires the following tools:
one Phillips screwdriver
one rubber mallet
Assembly may be easier if you have a socket set
or a set of ratchet wrenches. To avoid damaging
parts, do not use power tools.
ASSEMBLY