Filter
Top Products
11
10
10. Identify the Right Large Rail Cover (93), and
orient it as shown. Press the Right Large Rail
Cover into the Right Outer Shield (17).
Next, identify the Right Small Rail Cover (7), and
orient it as shown. Press the Right Small Rail
Cover into the Right Large Rail Cover (93) and
into the Right Outer Shield (17).
Attach the Left Large and Small Rail Covers
(90, 6) in the same way.
93
90
16
17
7
6
11. Identify the Right Handlebar (11), which is
marked with an “R” sticker. Orient the Right
Handlebar as shown.
Attach the Right Handlebar (11) to the Upright
(2) with three M8 x 25mm Flat Screws (68).
Then, slide a Handlebar Cover (31) onto the
Right Handlebar and attach it with three M4 x
16mm Screws (67).
Attach the Left Handlebar (10) in the same
way.
11
10
2
68
31
67
68
11