Filter
Top Products
21
HOW TO USE THE SOUND SYSTEM
To play music or audio books through the console
sound system while you exercise, plug the included
audio cable into the jack on the console and into a jack
on your MP3 player or CD player; make sure that the
audio cable is fully plugged in.
Next, press the play button on your MP3 player or
CD player. Adjust the volume level using the Volume
increase and decrease buttons on the console or the
volume control on your MP3 player or CD player.
HOW TO CHANGE CONSOLE SETTINGS
The console features a user mode that keeps track
of elliptical information and allows you to personalize
console settings.
To select the user mode, hold down the Display button
until the user mode information appears in the display.
The time display will show the total number of hours
the elliptical has been used.
The distance display will show the total distance (in
miles or kilometers) that the pedals have moved.
The lower section of the display will show the status
of an iFit Live module. If a wireless iFit Live module
is connected, the display will show the words WIFI
MODULE. If a USB module is connected, the display
will show the words USB/SD MODULE. If no module
is connected, the display will show the words NO IFIT
MODULE.
The matrix will show the selected unit of measure-
ment. To change the unit of measurement, press the
Enter button repeatedly. To view distance in kilome-
ters, select METRIC. To view distance in miles, select
ENGLISH.
Press the decrease button next to the Enter button.
The display will show the contrast level of the display.
Press the Resistance increase and decrease buttons
to adjust the contrast level.
The following settings can be viewed and changed
when an iFit Live module is connected:
Press the decrease button next to the Enter button to
view the status of the personal trainer voice. To turn on
or turn off the voice, press the Enter button.
Press the decrease button next to the Enter button to
view the default menu. The default menu is the menu
that will appear when you turn on the console. Press
the Enter button repeatedly to select the manual main
screen or the iFit Live main screen as the default
menu.
Press the decrease button next to the Enter button to
view the next setting. Press the Enter button to check
the connection status of an iFit Live module.
If a wireless iFit Live module is connected, the dis-
play will show the words WIFI STATUS and the signal
strength. If a USB module is connected, the display
will show the words USB STATUS. If the module is not
detected, the display will show the words NO MODULE
DETECTED.
Press the decrease button next to the Enter button to
view the next setting. To send and receive workouts,
workout logs, and updates using a wireless iFit Live
module, press the Enter button. When the process is
finished, the words TRANSFERS DONE will appear in
the display.
To exit the user mode, press the Display button.
THE OPTIONAL CHEST HEART RATE MONITOR
The optional
chest heart rate
monitor provides
hands-free
operation and
continuously
monitors your
heart rate during
your workouts.
To purchase
the optional
chest heart rate monitor, see the front cover of this
manual.