Filter
Top Products
OurWebsiteatwww.iFIT.comallowsyoutoaccess
basicprograms, audio programs, and video programs
directly from the internet. Additional options, such as
on-line competitions,personal training sessions via the
internet,and online tracking of your workout historyare
soon to be available. See www.iFIT.com for details.
To use programs from our Web site, the treadmill must
be connected to your home computer. See HOW TO
CONNECT YOUR COMPUTER on page 16. tn
addition, you must have an intemet connection and
an intemet service provider. A list of specific system re-
quirements will be found on our Web site.
Followthe steps below to use a program from our
Web site.
B Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
B
When the key is in-
serted, the manual
mode will be selected.
To use a program from
our Web site, press the
Program button repeat-
Select the iFIT.com mode.
edly untilthe iFIT.com indicator lights.
B Go to your computer and start an internet
connection.
B Start your web browser, if necessary, and go to
our Web site at www.iFIT.com.
[]Follow the desired links on our Web site to se-
lect a program.
Read and fellow the on-line instructionsfor using a
program.
r_ Follow the on-line instructions to start the
program.
When you start the program, an on-screen count-
down will begin.
B Return to the treadmill and stand on the foot
pads. Find the clip attached to the key and slide
the clip onto the waistband of your clothing.
When the on-screen countdown ends, the program
will begin and the walking belt will begin to move.
Hold the handrails, step onto the walking belt, and
begin walking. During the program, an electronic
"chirping" sound will alert you when the speed
and/or incline of the treadmill is about to change.
CAUTION: Always listen for the "chirp" and be
prepared for speed and/or incline changes.
If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next "chirp" is
heard, the speed and/or incline will change to
the next settings for the program.
To stop the walking belt at any time, press the
Stop button on the console. The Time/Incline/
Segment Time display willbegin to flash. To
restart the program, press the Start button or the
Speed A button. After a moment, the walking belt
will begin to move at 1.0 mph. When the next
"chirp" is heard, the speed and Incline will
change to the next settings of the program.
When the program iscompleted, the walking belt
willstop and the Time/Incline/Segment Time dis-
play will begin to flash. Note: To use another pro-
gram, press the Stop buttonand go to step 5.
Note: If the speed or incline of the treadmill
does not change when a "chirp" is heard, make
sure that the iFIT.com indicator is lit and that
the Time/Incline/Segment Time display is not
flashing. In addition, make sure that the audio
cable is properly connected, that it is fully
plugged in, and that it is not wrapped around a
power cord.
B Follow your progress with the LED track and
the displays.
See step5 on page 10.
[]When the program has ended, remove the key.
See step 6 on page 13.
19