Filter
Top Products
4. Attach the Pulse Sensor (114) to the Head6and (115).
Make sure that the sensor window is pres_sed through
the indicated hole in the Headband.
Press open the clothes clip, and insert the pulse sensor
wire into the clothes clip. Make sure that the pulse
sensor wire is resting against the hinge of the
clothes clip (see the Inset drawing). The use of the
pulse sensor is explained on page 8.
4 Sensor 114 I \ Clothes
_Clothes Clip
115 Pulse Sensor Wire"_
5. Remove the backing from the Adhesive Clip (90). Press
the Clip onto the Rear Roller Cover (82) in the indicated
location. Press the Allen Wrench (89) into the Clip.
Make sure that all parts are tightened before you use the
treadmill. Note: To protect the floor or carpet, place a mat
under the treadmill. For Information on ordering a mat,
see REPLACEMENT PARTS on the back cover.
89
7