Filter
Top Products
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove the packing materials. Do not dis-
pose of the packing materials untilassembly is completed. Assembly requires the included allen wrench _ .
._J
°
With the help of a second person, carefully turn the
treadmill onto its right side as shown.
Firmly slide a Base Extension (76) into one side of the
Base (86). Using the Allen Wrench (89), tighten an
Extension Bolt (13) into the Base Extension and the
Base.
Attach the other Base Extension (not shown) in the same
manner.
86
76
2. Attach six Base Pads (43) to the Base (86) and the Base
Extensions (76) inthe indicated locations. Note: One
extra Base Pad may be included.
With the help of a second person, carefully raise the
treadmill to the upright positionso the Base (86) and the
Base Extensions (76) are resting on the floor.
86
6
3° Refer to HOW TO LOWER THE TREADMILL FOR USE
on page 19. Follow the instructionsto lower the treadmill.
Align the holes in the Book Rack (101) withthe holes in
the Console Base (85). Attach the Book Rack with the
four Console Screws (6) as shown.
3
1oi