Filter
Top Products
MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts ofthe CARDIO FIT at least every three months. Keep the monitor out of direct
sunlight or the LCD display may be damaged. The monitorcan be cleaned using a soft,dry cloth. Do not allow
liquid to come in contact with the monitor• Remove the batteries when storingthe CARDIO FIT.
REPLACING THE BATI'ERIES
if the display ofthe Monitor (1) becomes dim, the two Ll154
watch batteries should be replaced. Remove the #8 x 1/2"
Screw (16) from the back ofthe Monitor. Remove the two
screws from the back cover of the Monitor and remove the
back cover. Push the two oldbatteries out of the clips, and
insed two new batteries,
Reattech the back cover and reattach the Monitor (1) to the
Frame (6). Make sure that the wire on the Monitor is plugged
into the sensorwire. Insed any excess wire intothe Frame.
Make sure not to pinch the wire between the Frame and the
Monitor.
ADJUSTING THE MAGNET AND REED SWITCH
Ifthe monitordoes not function propedy, the Magnet (27) and
Reed Switch (15) should be checked. Pivot the Pedal Frame
(7) until the Magnet is aligned with the Reed Switch. Loosen
the #8 x 3/4" Screw (18) and slide the Reed Switch toward
the Magnet untilthere is a 1/8" gap between the Magnet and
the Reed Switch. Retighten the Screw.
LUBRICATING THE CARDIO FIT
The ends of the LinkArms (4) should be oiled every six
months. Apply a few drops of light multi-purpose oil between
the Unk Arms and the dome caps inthe indica.tedlocations.
Apply Oil
8