Filter
Top Products
BEFORE YOU BEGIN
Thank you for selecting the innovative SEARS®LIFE -
;STYLER CARDIO FIT. The CARDIO FIT offers a
unique form of low-impact exercise that uses both the
upper body and lower body for increased
cardiovascular benefits and greater toning results.
For your benefit, read this manual carefully before
using the CARDIO FIT. If you have additional
questions, please call our toll-free HELPLINE at
1-800-736-6879, Monday through Saturday, 7 a.m.
until 7 p.m. Central Time(excluding holidays). To help
us assist you, please note the product model number
and serial number when calling. The model number is
831.287628. The sedal number can be found on a
decal attached to the CARDIO FIT (see the front cover
of this manual for the location of the decal).
ASSEMBLY
Place all parts of the CARDIO FIT in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning.
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY: The Included pedal tool (see the drawing
below), and your own phillips screwdriver -.-----..-[_, adjustable wrench _;_, and rubber
mallet _.
PART CHART
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part. The second number refersto the quantity used in assembly. Note:
Some small parts may have been pre-attached for shipping purposes. If a part is not found in the parts bag,
check to see ifit has been pre-attached.
1/2" Dome Cap (29)--4
Note: One extraDome Cap
may have been included.
1/2" Push Nut (30)--2
3/4" x 2" Pedal Tool--1
1/2" Bushing (25)--2
#8 x 1/2" Screw (16)_
Note: One extra #8 x 1/2" Screw
may have been included.
3