Filter
Top Products
10.PulltheMomentArm(10)forward. Hold the lower
and of the Left Press Arm (52) in the upper end of
the Moment Arm. The Left Press Arm mustbe
turned sothe Handle (12) isonthe side shown.
Attach the Left Press Arm with two 3/8" x 2 1/2"
Bolts(44) and two 3/8" Nylon Locknuts (33). The
Bolts must be Inserted from the side shown, or
the BOBYLIFT will not function properly.
Press a Small Bumper (91) ontothe underside of
the Handle (12).
Assemble the Right Press Arm (11) in the same
manner.
11. Insert the 114"x 2 1/2" Cardage Bolt (46) into the
Seat Bracket (38). Attach the Seat Bracket to the
Seat (14) with the two 1/4 x 3/4" Screws (47).
Insertthe 1/4" x 2 1/2" Carriage Bolt (46) into the
indicated hole in the Seat Frame (8). The narrow
end of the Seat must be facing the curved end of
the Seat Frame. Tighten a 1/4" Nylon Jam Nut (55)
with a 1/4" Flat Washer (40) onto the Carriage Bolt.
Attach the other end of the Seat to the Seat Frame
with a 1/4" x 2 1/2" Screw (32) and a 1/4" Flat
Washer (40).
12. Attach the Seat Frame (8) to the Front Ul_dght(7)
with the 5/16" x 2 3/4" Bolt (78) and a 5/16" Nylon
Locknut (73). The Moment Arm (10) must be in
front of the indicated tube on the Seat Frame.
Attach the Seat Braces (21) to the Seat Frame (8)
with a 3/8" x 2 3/4" Bolt (85) and a 3/8" Nylon
Locknut (33). Tighten the Nylon Locknuts on both
ends ofthe Seat Braces.
13. Hold the Cable (25) under the indicated 3 1/2"
Pulley (27). Hold the 1/2" x 1" Sleeve (89) between
the small holes in the lower end ofthe Leg Lever
(9). Attach the Sleeve with the 1/4" x 1 3/4" Bolt
(43) and a 1/4" Nylon Jam Nut (55). The Cable
must be between the Pulley and the Sleeve.
11
12
13
lO 12
7
73
33
8 10"
25
52