Filter
Top Products
TROUBLE-SHOOTING AND MAINTENANCE
Inspect and tighten all parts each time you use the BODYLIFT. Replace any worn parts immediately. The
BODYLIFT can be cleaned using a damp cloth and mild non-abrasive detergent, Do not use solvents,
HOW TO TIGHTEN THECABLE
Woven cable, the type used on the BODYLIFT, can
stretch slightlywhen it isfirst used. If there is slack in
the Cable (25), the Cable should be tightened. First,
move the selector to hole position Ul" (see HOW TO
SELECT A RESISTANCE SETTING on page 11).
Next, loosen the Adjustment Screw (81) near the Adjustment
lower end of the Cable. Pull the end of the Cable until Sleeve
there is no slack in the Cable, slide the adjustment
sleeve and the ball against the indicated 3 1/2" Pulley
(27), and retighten the Adjustment Screw.
If a replacement Cable (25) is needed, see ORDER-
ING REPLACEMENT PARTS on the back cover of
this user's manual.
Ball
10