Filter
Top Products
12
19. Attach a Press Arm (30) to the Press Frame (29)
with two M8 x 69mm Bolt (86) and two M8 Nylon
Locknuts (91).
Repeat this step with the other Press
Arm
(30).
21. Grease an M10 x 77mm Bolt (76). Attach the
Foot Plate (38) to the Leg Press Frame (28) with
the Bolt and an M10 Nylon Locknut (90). Make
sure the decal on the Foot Plate is right side
up. Do not overtighten the Locknut; the Foot
Plate must be able to pivot easily.
20. Grease an M10 x 108mm Bolt (72). Attach the
Leg Press Frame (28) to the Left Base (25) with
the Bolt and an M10 Nylon Locknut (90).
Do not
overtighten the Locknut; the Leg Press Frame
must be able to pivot easily.
19
20
21
22
30
30
86
91
29
28
90
72
25
38
28
76
90
Grease
28
91
37
109
22. See the
CABLE DIAGRAMS
on pages 26 and
27 as you assemble the cables and to identify
the cables.
Locate the Press Cable (109).
Attach the Cable
to the Leg Press Frame (28) with an M8 x 86mm
Shoulder Bolt (37) and an M8 Nylon Locknut (91).
Cable Assembly