Filter
Top Products
OWNER’S MANUAL 2007
ENGLISH
11
10
DEUTSCH
FRANÇAIS
The heart of the LC-R-System is the newly developed
and innovative Scott Genius LC-R Shock, offering two
functions:
By using the lock out lever on top of the shock body you
can choose between following functions:
1. ALL TRAVEL MODE: full travel of 100mm on Reflex
FX models.
2. LOCK OUT MODE: the shock is locked; climbing on
asphalt roads is now possible without any power loss.
Simultaneously a blow-off-system prevents the shock
being damaged in case the rider did not open the sys-
tem while crossing obstacles.
GENIUS LC-R SHOCK
S1 Upper Shock Bolt
S2 Lower Shock Bolt
S3 Shock Housing
S4 Rebound-Screw
S5 Negative Chamber Valve
S6 Positive Chamber Valve
S8 Allen Screw 3mm
S9 Lock-Out Lever
S10 Shock Piston
L1 Remote Lever
L2 Remote Control Cable
L3 Tension Screw
L4 Allen Screw
Remote Lever
L3
L4
L1
L2
BASIC SET-UP OF THE REMOTE
CONTROL OF GENIUS LC-R SHOCK
1.Put the remote lever (L1) to position “Lockout”. [1]
2. Fix the remote control cable (L2) with the cable fixation
screw (S8) using a 3mm allen key (tightening torque:
3 Nm) on the lock out lever (S9).
3.When putting now the remote lever to position “All
Travel” the cable will pull the Lockout lever downward
and the shock will offer now the full travel. Check now
the set-up for perfect function of remote lever and
shock
6.In case you want to fine-tune the brake-away power
of the remote lever, you can do this by using a 2mm
allen key and by turning the allen screw (L4). In case
you want to readjust the tension of the remote control
cable you can do this by using the tension screw (L3).
[2]
1
2
2 mm allen keg
TRACTION CONTROL FUNCTIONS
Lockout
Full Travel
Genius LC-R Shock
S1
S9
S8
S3
S4
S10
S2