SET-UP OF REBOUND
GENIUS TC SHOCK
MORE DETAILS ABOUT SHOCK
SET-UP
In case you want more exact numbers of the shock air
pressure than shown on the decal on the piggy-back or
you’re looking for tuning hints including different shock
characteristics of the Genius Shock, please have a look
at
www.scott-sports.com
In addition you can download this tuning program on
your pc.
“Rebound” describes the speed the shock comes back
to its original length after absorbing an obstacle.
By using the red rebound screw (S5) you can adjust the
rebound step by step.
Please refer to the following instruction:
Ride your bike off a sidewalk (remain in the saddle)
and check how many times it bounces.
1. If it bounces 1-2 times, the set up is good.
2. If it bounces more than 3 times the rebound is too
fast. Turn the screw 1-2 “clicks” clockwise.
3. If it does not bounce the rebound is too slow. Turn
the screw 1-2 “clicks” counter clockwise. [11]
11
Rebound knob
OWNER’S MANUAL 2007
ENGLISH
09
08
DEUTSCH
FRANÇAIS