Filter
Top Products
8
6. Press the 40mm x 50mm Inner Cap (41) into the
Seat Frame (6). Press six 8mm Bushings (32)
into the Seat Frame and the Backrest Frames (10).
Attach the Seat Bracket (14) to the Seat Frame
(6) with an M10 x 78mm Bolt (28) and an M10
Nylon Locknut (35).
Attach the Seat Bracket (14) to the Frame (1) with
an M10 x 100mm Bolt (38) and an M10 Nylon
Locknut (35).
Lubricate an M10 x 140mm Bolt (37). Attach the
bottom holes in both the Backrest Frames (10)
and the two Plastic Plates (26) to the Seat Frame
(6) with the Bolt, two 12.5mm Spacers (33), and
an M10 Nylon Locknut (35). Do not overtighten
the M10 Nylon Locknut; the Backrest (8) must
be able to pivot easily.
Tighten the M8 Nylon Locknuts (42) and the
M6 x 50mm Bolts (39) used in step 4.
7. Press two 8mm Bushings (32) into the Leg Lever
Bracket (13).
Attach the Leg Lever Bracket (13) to the Seat
Frame (6) with the Small Adjustment Knob (29).
37
6
14
35
35
1
26
32
32
32
33
41
13
32
6
29
38
6
7
8. Press three 50mm Square Inner Caps (22) into
the Leg Lever (15). Press a 50mm Round Inner
Cap (5) into the weight tube.
Lubricate an M10 x 78mm Bolt (28). Attach the
Leg Lever (15) to the Leg Lever Bracket (13) with
the Bolt and an M10 Nylon Locknut (35). Do not
overtighten the Nylon Locknut; the Leg Lever
must pivot freely.
22
22
15
22
35
13
28
5
Weight Tube
8
Lubricate
33
28
10
9. Press four 19mm Round Inner Caps (24) into the
ends of the two Pad Tubes (25).
Insert the Pad Tubes (25) into the holes in the
Leg Lever (15). Slide two Foam Pads (23) onto
each Pad Tube.
24
23
23
24
15
25
23
23
9