Filter
Top Products
5
PART IDENTIFICATION CHART
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST on page 14 of this manual. Note: Some small parts may
have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.
M10 Nylon Locknut (35)
12.5mm Spacer (33)
M8 Nylon Locknut (42)
M6 Washer (19)
M10 Washer (27)
M10 x 65mm Bolt (36)
M10 x 78mm Bolt (28)
M10 x 100mm Bolt (38)
M10 x 140mm Bolt (37)
M6 x 16mm Bolt (31)
M6 x 50mm Bolt (39)
M8 x 55mm Carriage Bolt (40)
M10 x 95mm Bolt (34)