Filter
Top Products
23
THE INFORMATION MODE
The console features an information mode that keeps
t
rack of treadmill information and allows you to person-
alize console settings.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The time display will show the total number of hours
the treadmill has been used.
The distance display will show the total number of
miles (or kilometers) that the walking belt has moved.
The lower section of the display will show the status of
an iFit Live module. If a wireless iFit Live module is
connected, the display will show the words WIFI MOD-
ULE. If a USB module is connected, the display will
show the words USB/SD MODULE. If no module is
connected, the display will show the words NO IFIT
MODULE.
The matrix will show the selected unit of measurement.
To change the unit of measurement, press the Enter
button or the Speed increase button. To view distance
in miles, select ENGLISH. To view distance in kilome-
ters, select METRIC.
Press the decrease button next to the Enter button.
The console features a display demo mode, designed
to be used if the treadmill is displayed in a store. While
the demo mode is turned on, the console will function
normally when you plug in the power cord, press the
power switch into the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, the word ON
will appear in the matrix. To turn on or turn off the
demo mode, press the Enter button or the Speed de-
crease button.
Press the decrease button next to the Enter button.
The display will show the contrast level of the display.
Press the Incline increase and decrease buttons to ad-
j
ust the contrast.
I
f a wireless iFit Live module is connected, press the
decrease button next to the Enter button to view the
status of the personal trainer voice. To turn on or turn
off the voice of the personal trainer, press the Enter
button.
If a wireless iFit Live module is connected, press the
decrease button next to the Enter button to view the
default menu. The default menu will appear when you
insert the key into the console or when you press the
Home button. Press the Enter button repeatedly to se-
lect the manual mode main screen or the iFit Live main
screen as the default menu.
If a wireless iFit Live module or a USB module is con-
nected, press the decrease button next to the Enter
button to view the status of the iFit Live module. Press
the Enter button to check the status of the iFit Live
module. If a wireless iFit Live module is connected, the
display will show the words WIFI STATUS. If a USB
module is connected, the display will show the words
USB STATUS. If no module is connected, the display
will show the words NO MODULE DETECTED.
If a wireless iFit Live module is connected, press the
decrease button next to the Enter button to transfer
data. To send and receive workouts, workout logs, and
updates, press the Enter button. When the process is
finished, the words TRANSFERS DONE will appear in
the display.
To exit the information mode, remove the key from the
console.