Filter
Top Products
9
CAM ADJUSTMENTS
Synergy 4
™
:
Draw Length: The draw length is adjusted by placing the
bow in an appropriate bow press and relieving the tension
from the string and cables. Shortening the effective length of
the string shortens the draw length and lengthening it
lengthens the draw. The bow is shipped from the factory with
the string in the middle slot. Moving the string one slot on
one of the wheels changes the draw length ¼". Moving the
string one slot on each of the two wheels makes a change
of ½". The cables can be moved to change the draw length
by ½". Adjustments to the cable must be made on both
wheels. Remember, shortening the draw length decreases
the draw weight and lengthening the draw length increases
the draw weight.
Stage 3
™
:
Draw Length: The draw length is adjusted by placing the
bow in an appropriate bow press and relieving the tension
from the string and cables. Move the string to the slot that
will shorten the effective length of the string to shorten
the draw length by ½" per wheel. Move the string to the
slot that will lengthen the effective length of the string to
lengthen the draw of the bow by ½" per wheel.
NOVA ONE-CAM:
Draw Length: The draw length may be adjusted by
placing the bow in an appropriate bow press relieving
the tension from the string and cable. Moving the string
from the center peg to the peg furthest from the string
groove shortens the draw length by approximately ½".
Moving it to the peg closest to the string groove increas-
es the draw length by approximately ½".
Synergy 4
™
Stage 3
™