Filter
Top Products
4
• Always inspect your bow thoroughly before each shooting session to insure
that it is in good working order. Check for worn or missing components and have
them replaced as required, i.e. bushings, spacers, etc.
• Inspect your arrows to insure that they are straight and that each nock is in
good condition. A cracked nock can break when fired from the bow and cause
the bow to "dry fire" resulting in possible injury to the archer and damage to the
bow.
• When purchasing arrows for your bow, consult the selection chart from the
arrow manufacturer and select the correct arrow for your application. Always
use an arrow that meets the weight requirement marked on the
specification label on the lower limb of your bow. Failure to do so could cause
personal injury and damage to your bow.
Your PSE bow will give you many years of service if maintained and cared
for properly.
IMPORTANT: Before servicing any PSE bow in a bow press, back out each limb
bolt 4 complete turns from bottomed position.
• Keep synthetic cables and strings waxed. Apply bow string wax to your
synthetic cables and string before each shooting session.
• Strings and cables must be replaced periodically. A worn cable or string can
suddenly break causing serious injury to the archer and damage to the bow. It is
recommended that the string and cables be replaced at least every 5,000 shots
or 12 months.
• Always store your bow in a cool dry place. High temperatures, such as those
that can occur in a truck or interior of a vehicle, can cause serious damage to
your bow.
• After use in high humidity or damp conditions, wipe metal components of bow
with a light oil.
Get the PSE BOW OWNER'S GUIDE video at
www.pse-archery.com. This entertaining and
informative video covers all aspects of modern
bow technology. 60 minutes.
GENERAL OPERATING INSTRUCTIONS
BOW MAINTENANCE