Filter
Top Products
21
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the trainer near the power cord (see c. on page 20). If the
circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Re-insert the key fully into the console.
d. Make sure that the on/off switch is in the “on” position.
e. If the incline trainer still will not run, please call our Customer Service Department, toll-free.
PROBLEM: The key is inserted and the displays on the console are lit, but the walking belt will not start
SOLUTION: a. Unplug the power cord, wait for five minutes, and then plug the power cord back in.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG THE
POWER CORD. Remove the two indicated Screws
(43) from the Belly Pan (16). Loosen the other indi-
cated Screw three turns. Carefully lift off the Front
Roller Cover.
b. Locate the Reed Switch (87) and the Magnet (13) on
the side of the Pulley (11). Turn the Pulley until the
Magnet is aligned with the Reed Switch. Make sure
that the gap between the Magnet and the Reed
Switch is about 1/8”. If necessary, loosen the Screw
(43) and move the Reed Switch slightly. Retighten the
Screw. Re-attach the front roller cover, and run the
trainer for a few minutes to check for a correct speed
reading.
PROBLEM: The grade of the incline trainer does not change correctly or does not change when iFIT.com
CD’s and videocassettes are played
SOLUTION: a. With the key in the console, press one of the Incline buttons. While the grade is changing, re-
move the key. After a few seconds, re-insert the key. The incline trainer will automatically rise to
the highest grade and then return to the lowest grade. This will recalibrate the trainer.
b. If an “E6” appears in the Distance/Time display, remove the key and unplug the power cord. Wait
for sixty seconds, plug in the power cord, and re-insert the key.
13
43
43
16
Loosen
three
turns
b
Top
View
1/8”
43
87
11
a