Filter
Top Products
24
H
OW TO OPERATE THE PERSONAL TELEVISION
IMPORTANT: Before operating the television, you
must connect an antenna, a 75 ohm CATV cable, or
a VCR to the 75 ohm antenna terminal on the tread-
m
ill. See page 11 for instructions.
Follow the steps below to operate the television.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page
15.
Press the Power button to select a television
source.
When the key is inserted, the television will auto-
matically turn on. If you have plugged a DVD
player or VCR into the audio/video RCA jacks on
the back of the console, select the Input source by
pressing the Power button once or twice.
Press the Channel buttons to select the de-
sired channel.
To select a channel, press the Channel buttons.
The selected channel number will appear on the
screen for a few seconds. Note: The television is
equipped with a channel memorizing function that
allows you to go directly from the current channel
to the next channel saved in memory. Before
channels can be selected in this way, they must
be saved in the television’s memory. See HOW
TO USE THE INFORMATION MODE at the right.
Press the Volume buttons to adjust the volume.
When either Volume button is pressed, the vol
-
ume level indicator will appear on the screen for a
few seconds. To temporarily mute the sound,
press the Mute button. Press the Mute button
again to listen to the television.
Note: When the
iFIT mode is selected, the Volume buttons and the
Mute button will control the volume of the audio of
the iFIT program.
To use earphones or headphones (not included),
plug them into the headphone jack on the con-
sole.
H
OW TO USE THE INFORMATION MODE
The console features an information mode that allows
you to view treadmill usage information, select a sys-
t
em of measurement for the console, and turn on and
t
urn off the demo mode. The information mode also al-
lows you to adjust the settings of the television and to
save channels into the television’s memory.
Follow the steps below to use the information mode.
Hold down the Stop button while inserting the
key into the console.
When the information mode
is selected, the left display
will show the total number of
hours that the treadmill has
been used. The upper part of
the right display will show the
total number of kilometers or
miles that the walking belt
has moved.
In addition, the right display will show the letter “E”
for English miles or the letter “M” for metric kilome-
ters. Press the Speed increase button to change
the unit of measurement if desired.
The letter “P” may also appear in the right display.
When you use an iFIT Card, a personal trainer will
guide you through your workouts and give de-
tailed instructions if “P” is selected as the audio
setting. If you turn off the “P” setting, your per-
sonal trainer will simply guide you through your
iFIT workouts. Press the Incline decrease button
to change the audio setting if desired.
IMPORTANT: If the letter “d” appears in the right
display, the “demo” mode is selected. This mode
is intended to be used only when a treadmill is
displayed in a store. When the demo mode is se-
lected, the power cord can be plugged in, the key
can be removed from the console, and the dis
-
plays and indicators on the console will automati-
cally light in a preset sequence. The buttons on
the console will not function.
If a “d” appears in
the right display when the information mode is
selected, press the Speed decrease button.
1
4
3
2
1