Filter
Top Products
8
42
7. Next, touch the Right Handrail (72) to discharge any
static. Press the end of the Upright Wire (42) into the
socket in the bottom of the Console Base (47). The con-
nector should slide easily into the socket and snap
into place. If the connector does not slide easily and snap
into place, turn the connector and then insert it.
7
72
47
Small
Hole
71
5
5. Hold the Console Base (47) near the Left Handrail (71).
Attach the end of the ground wire in the Console Base to
the small hole in the side of the Left Handrail with the
1/2” Ground Screw (26).
47
26
47
6. Set the Console Base (47) on the Right Handrail (72) and
the Left Handrail (71).
Attach the Console Base (47) with four 3/4” Screws (2).
Start all four Screws before tightening them; do not
overtighten the Screws.
6
2
2
71
72