Filter
Top Products
v
Safety Approval
When identified with the ETL-c logo, the EFX has been tested and conforms to the requirements of
CAN/CSA-E-335-1/2E-94, Safety of Household and Similar Electrical Appliances.
Grounding Instructions
The Elliptical Fitness Crosstrainer must be grounded. If it should malfunction or break down,
grounding provides a path of least resistance for electric current which reduces the risk of electrical
shock. The unit is equipped with a power cord having an equipment-grounding conductor and a
grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or service person if you are in doubt as to whether the EFX is
properly grounded. Do not modify the plug provided with the unit—if it doesn’t fit the outlet, get a
proper outlet installed by a qualified technician.
Proper grounding plug
and power outlet for 120v
connection.
Diagram A
The EFX is for use on a nominal 120-volt circuit (refer to the WARNING below and to the
Installation
Requirements
on page 2) and has a grounding plug that looks like the plug illustrated in Diagram A.
WARNING
This product is for use on a circuit having a nominal rating of more than 120 volts and is factory-
equipped with a specific electric cord and plug to permit connection to a proper electric circuit.
Make sure that the product is connected to an outlet having the same configuration as the plug. No
adapter should be used with this product. If the EFX must be reconnected for use on a different
type of electric circuit, the reconnection should be made by qualified service personnel.
ATTENTION: Haute Tension
Débranchez avant de réparer