Filter
Top Products
page 31
COMMERCIAL PRODUCTS DIVISION
The C932 keypad allows a user to control the workout session. Information that
you will find in this section includes:
• Tips on using the display keypad
• Descriptions of each key on the keypad
• How to use the SELECT key to change which features appear on the display
KEYPAD TIPS
Review the following tips and make sure that your customer’s know how to use
the keypad.
• Accurate entries are required or features such as SmartRate
®
will not work
properly.
• During the Setup prompts, a user can change the information being dis-
played by pressing any ▼ or ▲ key. (Incline and speed levels are not af-
fected until the course begins.)
• Press SELECT to “select” the information being displayed.
• Pressing QuickStart at the PRECOR banner bypasses further selections
and displays the Manual (MANL) course. Default values apply. The
SmartRate
®
display will not appear. Refer to
The Setup Mode and the
QuickStart
TM
Feature
on page 28.
• Anytime during the setup or workout, press RESET to return to the PRECOR
banner.
• A time-out occurs during the Setup prompts if the C932 detects no key
presses for two minutes. The display returns to the PRECOR banner.
SPECIAL KEYPAD FUNCTIONS AT THE PRECOR BANNER
A variety of tasks can be performed from the banner using different key presses:
Note: Key presses to the ▼ or ▲ key are ignored when the banner is being displayed.
RESET — initiates the diagnostic mode. Refer to
Club Information
on page 20.
QUICKSTART
TM
— causes the system to start the Manual (MANL) course. Default
settings apply. Refer to
The Setup Mode and the QuickStart Feature
on page 28.
SELECT — initiates the Setup mode and causes the course prompt to appear.
The C932 Keypad