Filter
Top Products
Cardio Theater Integrated Bracket Assembly Instructions
page 9
4
Feed the Cable through the Base
Feed the Cable
through the Base
1. Use a Phillips-head screwdriver to remove the
16 screws that hold the side covers on the unit.
Set the screws aside.
2. Slide both side covers up and away from the
base of the unit.
3. Feed the coaxial/power cable and its connectors
into the internal upright frame tube that does not
contain the ribbon cable.
4. Pull the cable and both connectors out from the
base of the tube and attach the power extension
cable to the power connector.
1
2
3 4
Power connector Power
extension
cable