Filter
Top Products
Cardio Theater Integrated Bracket Assembly Instructions
page 13
Attach the LCD Screen
7. Connect the coaxial/power cable connectors to
the LCD Screen.
Attach the connectors – coaxial, power, and
DVD – to the back of the LCD Screen.
Note: If you do not have the DVD option, you
can feed the DVD cable back into the pivot tube
compartment so it is not hanging out.
8. Connect the controller cable.
Feed the controller cable through the front side
of the pivot tube and attach it to the back of the
LCD Screen. You will hear a definite click as the
connector snaps into place inside its receptacle.
Note: For more information about cable connec-
tions, refer to the Cardio Theater LCD Screen
manual that was packaged with the product.
Important: If you purchased the DVD Integrated
Bracket Option, you will want to install that
option before you continue to the next section.
Refer to the
DVD Integrated Bracket Option
Guide
for assembly instructions.
7
Coaxial
connector
Power
connector
DVD
connector
Note: If you do not have the DVD option,
you can feed the DVD cable back into the
pivot tube compartment so it is not
hanging out.
8
Controller
cable