Filter
Top Products
Cardio Theater Integrated Bracket Assembly Instructions
page 10
5
6
7
Coaxial/power cable
(with power extension cable)
Right side cover
Feed the Cable through the Base
5. Snap the coaxial/power cable into the existing
cable clips as you feed it along the base and
out the front of the unit.
6. Reassemble the side covers. As you face the
display, the right side cover must be placed into
position first. The left side cover fits into it.
Note: Check the connectors on the coaxial/
power cable to make sure they are easily
accessible.
7. Replace the 16 screws removed in step 1 and
reposition the rubber boot.
Clip
Front of
the unit
Power
extension
connector
Replace the side cover
screws and lower the
rubber boot.
Coaxial
connector