Owner’s Manual: Important Safety Instructions 3
IMPORTANT SAFETY INSTRUCTIONS
Safety Approval
When identified with the ETL-c logo, the unit has
been tested and conforms to the requirements of
CAN/CSA-E-335-1/3-04, EN 60335-1: 2002 Safety of
Household and Similar Electrical Appliances.
Grounding Instructions
The treadmill must be grounded. If the unit malfunctions or
breaks down, grounding provides a path of least
resistance for electric current, which reduces the risk of
electrical shock. The unit is equipped with a power cord
having an equipment-grounding conductor and a
grounding plug. The plug must be inserted into an outlet
that is properly installed and grounded in accordance with
all local codes and ordinances. Failure to properly ground
the treadmill could void the Precor Limited Warranty.
Improper connection of the
equipment-grounding conductor
can result in a risk of electric
shock. Check with a qualified
electrician or service person if you
are in doubt as to whether the unit
is properly grounded. Do not
modify the plug provided with the
treadmill. If it does not fit the
outlet, get a proper outlet installed
by a qualified electrician.
120 V Units Designated for U.S. Markets
The treadmill must be connected to a dedicated,
grounded circuit. A 15 amp dedicated circuit is required,
but a 20 amp dedicated circuit is recommended. The
unit’s grounding plug looks like the plug shown in
Diagram 1. The power outlet must have the same
configuration as the plug. No adapter should be used with
this product.
Diagram 1: 120-volt power plug
DANGER
IMPORTANT SAFETY INSTRUCTIONS
92x_Owners Manual.book Page 3 Tuesday, April 22, 2008 8:18 AM