Precor 9.23 Treadmill User Manual


 
Owner’s Manual: Display Console 20
INCLINE: Press and hold the INCLINE arrow keys to
increase or decrease the incline from 0% to 15% in
0.5% increments.
Changes to the incline are not immediate. It takes
time for the lift to reach the target incline shown on
the display.
The incline setting affects the column height in the
program profile. Refer to Diagram 10. The INCLINE
display shows the new setting.
QUICKSTART: Press QUICKSTART to start your
workout immediately using the Manual Program.
Refer to Choosing QUICKSTART.
STOP: A firm tap on the red STOP key slows the
running belt to a stop and the treadmill enters pause
mode. To resume, press QUICKSTART or the
SPEED up arrow key. To reset to the banner, hold the
red STOP key for a few seconds or press it two more
times. Refer to Pausing During a Workout or the
Cool-Down Period.
SPEED: Press and hold the SPEED arrow keys to
increase or decrease the running belt speed in 0.1
increments from 0.5 to 12 mph (0.5 to 20 kph).
When you press the arrow keys, a target speed
appears in the display. The running belt speed
changes to meet the target, but the change occurs
gradually so the transition is smooth.
92x_Owners Manual.book Page 20 Tuesday, April 22, 2008 8:18 AM