Filter
Top Products
Determining Your OwnZone
Find your OwnZone limits in 1-5 minutes during
warm-up by walking, jogging, or doing some other
sport. Before you start, make sure that your User
settings are correct and the OwnZone function is
activated.
1. Start recording the exercise. The OwnZone
symbol appears on the display and
determination begins. The process is carried
out in five stages. A beep will signal the end of
each stage. Avoid stopping during OwnZone
determination.
•
OZ> Walk at a slow pace for 1 min. Keep your
heart rate below 100 bpm/ 50% HR
max
during
this first stage.
•
OZ>> Walk at a normal pace for 1 min. Smoothly
increase your heart rate about 10 bpm/ 5%
HRmax.
•
OZ>>>Walk at a brisk pace for 1 min. Smoothly
increase your heart rate about 10 bpm/ 5%
HRmax.
•
OZ>>>>Jog at a slow pace for 1 min. Smoothly
increase your heart rate about 10 bpm/ 5%
HRmax.
•
OZ>>>>>Jog at brisk pace or run for 1 min.
2. When you hear two, consecutive beeps, your
OwnZone has been determined. OwnZone
Updated alternates with the heart rate limits on
the display after a succesful determination.
If OwnZone determination fails, OwnZone
Limits and your previous OwnZone limits will
appear on the display. If OwnZone has not
previously been determined, age-based limits
will be used.
3. Proceed with your exercise. Try to stay inside
the given heart rate zone to maximize exercise
benefits.
ENGLISH
20 Settings