Support User Manuals

Polar CS600X Fitness Electronics User Manual

Open as PDF

of 50

5. Training

Adjust the Equine Transmitter

ForinstructionsonhowtoinstallthePolarEquineTransmitter,con sultthetransmitterusermanual.

Start Training

Adjust the transmitter and attach the Training Computer to the bike mount.

1. Start heart rate measurement by pressing the OK button. The Training Computer goes

into pause mode.

2. Select the sulky you are going to exercise with. sulky 1 is set as a default. Select

Settings > sulky > sulky 1 > OK. Select Other if you only want to record heart rate.



Only the sulkys that are switched ON are shown on this selection list. For further

information see sulky Settings.

The number on the bottom, right hand corner indicates the sulky that is going to be

used. By pressing and holding the DOWN button, you can switch the sulky quickly or

switch to heart rate recording only. By pressing and holding the UP button you can

switch the exercise quickly.

3. Within 4 seconds, your heart rate appears on the display. The frame around the heart

symbol indicates that transmission is coded. The hoof symbol on the bottom, right

hand corner of the display, flashes until all the sensors are found.

4. StartexercisingbypressingOK.Theexercisetypeisdisplayedintheupperleft‐handcorner.

In Settings, you can change or view different settings before exercise. The Settings menu lists

the following options :

 Exercise:SelectFreeorInterval.

 GPS:SettheGPSfunctionON/OFF(optional)

 Altitude:Calibratealtitude.

 Rec.rate:Settherecordingrate.

 RRdata:SwitchtheRRrecordingonoroff.

previous next