Filter
Top Products
Basic Settings
Before using your Training Computer for the first time, customize the basic settings. Enter as
accurate data as possible to ensure correct feedback based on your performance.
To adjust the data, use UP, DOWN and accept with OK. The values scroll faster if you press
and hold UP or DOWN.
1. To activate your Training Computer, press OK twice. Once activated, it cannot be
switched off!
2. Welcome to Polar World! is displayed. Press OK.
3. Language: Select English, Deutsch, Español, Français or Italiano. Press OK.
4. Start with sulky settings is displayed. Press OK.
5. Number of sulkys: Select 1, 2 or 3 depending on how many sulkys you will be using.
If you only use one sulky, settings for sulkys 2 or 3 sulkys can be entered later. For
further information see sulky settings.
6. Wheel: Enter the wheel size (mm) for each of your sulkys. For further information, see
Measuring Wheel Size
.
7. Start with basic settings is displayed. Press OK and adjust the following data:
8. Time: Select 12h or 24h. With 12h, select AM or PM. Enter the local time.
9. Date: Enter current date; dd = day, mm = month, yy = year. If you use imperial units,
set the date; mm = month, dd = day, yy = year.
10. Units: Select metric (kg/cm/km) or imperial (lb/ft/mi) units.
11. Settings OK? is displayed. Select Yes or No. Select Yes to accept and save settings.
The Training Computer will display time of day. Select No if settings are incorrect and
need to be changed. Press STOP to return to the data you want to change.
Use the Polar ProTrainer 5 Equine Edition to enter all basic settings.