Filter
Top Products
Make sure the Training System is no further than 40 m/131 ft from the transmitter.
Make sure the transmitter belt has not loosened during exercise.
Make sure that the electrodes of the transmitter are moistened.
Make sure the transmitter is clean.
Make sure that there is no other heart rate transmitter within 40 m/131 ft.
Strong electromagnetic signals can cause erratic readings. For further information, see
Precautions.
If the erratic heart rate reading continues despite moving away from the source of
disturbance, slow down your speed and check your pulse manually. If you feel it
corresponds to the high reading on the display, your horse may be experiencing
cardiac arrhythmia. Most cases of arrhythmia are not serious, but consult your
veterinarian nevertheless.
A cardiac event may have altered the ECG waveform. In this case, consult your
veterinarian.
…Check WearLink! is displayed and your Training System cannot find your heart rate
signal?
Make sure the Training System is no further than 40 m/131 ft from the transmitter.
Make sure the transmitter belt has not loosened during exercise.
Make sure that the electrodes of the transmitter are moistened.
Make sure the transmitter / electrodes are clean and undamaged.
If you have done all of the above-mentioned actions, and the message still appears and
heart rate measurement does not work, the battery of your transmitter may be empty.
For further information, see Care and Maintenance.
…New WearLink found. Teach new WearLink? is displayed?
If you have purchased a new transmitter as an accessory, it will have to be introduced to the
Training System. For further information, see Teach New Transmitter.
If the transmitter you are using is included in the product set, and the text appears on the
display, the Training System may be detecting the signal of another transmitter. In that case,
make sure you are wearing your own transmitter, that the electrodes are moistened, and that
the transmitter belt has not loosened. If the message still appears, the battery of your
transmitter is empty. For further information, see Care and Maintenance.
...Check Speed! is displayed?
For further information, consult Speed Sensor W.I.N.D. user manual.
...the altitude keeps changing even if I am not moving?
The Training System converts measured air pressure into an altitude reading. This is why
changes in the weather may cause changes in altitude readings.
…the altitude readings are inaccurate?
Your altimeter may show faulty altitude if it is exposed to external interference like strong
wind or air conditioning. In this case, try to calibrate the altimeter. If the readings are