Filter
Top Products
6
PROGRAMMING
Mode Explanations
0. GAME TYPE—There are 5 game types:
− 0 Left, Right, Forward, Backward, Nudge—This mode is for a control panel that commonly has
a joystick and allows the player to lower the claw each time the drop button is pressed. This
allows the player to hone in on the prize they are attempting to win. NOTE: The crane will po-
sition itself according to the operator presets, options 14 and 15, at coin up if Option 21 is set
to “0” (Off). The crane head will position itself according to the operator presets, options 14
and 15, at the end of the game if Option 21 is set to “1” (On).
− 1 Left, Right, Forward, Backward, Drop—This mode is for a control panel that commonly has a
joystick and the claw drops fully when the drop button is pressed. NOTE: The crane will posi-
tion itself according to the operator presets, options 14 and 15, at coin up if Option 21 is set to
“0” (Off). The crane head will position itself according to the operator presets, options 14 and
15, at the d of the game if Option 21 is set to “1” (On).
1. GAME MODE—There are 2 game modes:
− Normal play—This is the standard type of play where a player has inserted enough coins to
create 1 credit and then plays the game. Whether the player wins a prize or not, the game is
over.
− Play till win—In this mode, the player has inserted enough coins to create 1 credit and will be
able to play the game until they win a prize.
2. TIME—This option allows the operator to set the game play length. Options are from 20 seconds
to 60 seconds in 5 second intervals.
3. COIN—This option allows the operator to set the number of coins needed to create 1 credit. A setting
of “0” will put the game into free play.
4. BILL—This option allows the operator to set the number of coins each bill is worth. A setting of “0”
turns this option off.
5. COUNTER TYPE—Setting this option to “0” will have the game count credits on the mechanical and
software counters. Setting this option to “1” will have the game count coins.
6. ATTRACT—This option allows the operator to set the number of minutes between attract modes.
Available settings are from 0 minute to 30 minutes in 1 minute intervals. A setting of “0” turns
off the attract mode.
7. ATTRACT TYPE—This option allows the operator to choose what type of attract mode they want.
- “1” will have an attract mode with movement only.
- “2” will have an attract mode with both audio and movement.
8. F / B SPEED—This option allows the operator to adjust the forward / backward speed of the crane.
The available speeds are 10—20 with 10 being slow and 20 being fast.
9. L / R SPEED—This option allows the operator to adjust the left / right speed of the wagon. The
available speeds are 10—20 with 10 being slow and 20 being fast.
10. UP SPEED—This option allows the operator to adjust the up speed of the crane. The available
speeds are 13—15 with 13 being slow and 15 being fast.
11. DOWN SPEED
—This option allows the operator to adjust the down speed of the crane. The
available speeds are 15—20 with 15 being slow and 20 being fast.