Filter
Top Products
STEP 6
¯
Attach CABLE SWIVEL (3) to the
ADJUSTMENT TUBE on the 100 LEG
PRESS using the existing previously removed
3/8 X 4-1/2" BOLTS, WASHERS, 2"
WHEELS AND NUT. (Note: Securely
tighten, then back off 1/4 turn to allow the
CABLE SWIVEL & WHEELS to rotate
freely.) See FIGURE 6.
FIGURE 7
STEP 7
¯
Securely fasten the 100 LEG PRESS to the FRONT LEG (1) using two 3/8 X 3" BOLTS (14), four 3/8" WASHERS (10), and
3/8" LOCKNUTS (11) as shown in FIGURE
5