Filter
Top Products
BASE
~1/2" PULLEY~
FIGURE 5
~3/8" X 2" BOLT
3/8" LOCK NUT~. _
3/8" WASHER/,,~
STEP 5
¯ Remove two 318 X 2" BOLTS, four 3/8" WASHERS, two 2-7/8" L-BRACKETS, two 4-1/2" PULLEYS, and two 3/8" LOCK NUTS from
the upper flats on the BASE as shown in FIGURE 5.
BASE
318 X 2-1/2" (~
"" "(~3/8" WASHER
FIGURE 6
./2" PULLEY
2-7/8" L-BRACKET
3/8" LOCK NUT
STEP 6
¯ SECURELY assemble the previously removed 4-1/2" PULLEYS to the BASE usingtwo 3/8 X 2-1/2" BOI,TS (1), four previously
removed 3/8" WASHERS, two previously removed 2-7/8" L-BRACKETS, two SWIVEL SNAPS (3), two 3/8" HEX NUTS (8), and
previously removed 3/8" LOCK NUTS. See FIGURE 6.